Plugin tutorial for KOALA HD

* Use this plugin (plugin_29OCT2010(M)) with SW v.1.08.52 or later.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the Koala during Live Watching.
4. When download pop‐up window appears, please find "plugin" folder with Right/Left button of
RCU.
5. Download the "plugin" to the Koala.
6. Download completes, the Koala will be rebooted automatically.

Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS (Multi CAS, Univiersal CAS)
: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when
the Koala turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
It is also a server for Home Network Sharing (refer to the explanation at the bottom).
2. Mclient : client for Home Network Sharing (refer to the explanation at the bottom).
3. Keditor (Key editor) : you can edit key for normal CAS.
4. Coconut : Key editor for Biss and const CW (newly added in this version).
If you input only key without SID, TSID, ONID, the key will find a matching Biss service
automatically.
If a channel is Biss scrambling only sometimes, the key, SID, TSID, ONID should be input
altogether.
5. XcamConfigure : you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it
by pressing 1407.
6. Xcamclient : you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when
the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.
After input and edit C/S information via XcamConfigure, you can start it by Xcamclient
"started"
** Press ˇ°0ˇ± (otherwise ˇ°EXITˇ± & ˇ°0ˇ±)in Live watching mode, you can see Xcam info box.
After getting Xcam info box, you can select CAID of the service with UP/DOWN key.
It is similar function with cccam.prio.
7. ExSIM : You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK
button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.
8. Kain2r : This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop‐up menu will appear.
5. Select at the bottom of the Pop‐up menu.
6. Select Server Address and press 1407.
7. Input www.dragonlink.biz and press enter in the on‐screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on‐screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.
9. Mgcamd : Mgcamd is a separated solution, and C/S information cannot input in XcamConfigure.
C/S information for Mgcamd should be editted and input into plugin > keys > newcamd.
In the newcamd file, you can see the examples for how to input C/S information.
* You can set all the menus "Started" at the same time except Mgcamd.
When Mgcamd is "Started" to use, all other menus should be "Stop".
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data
within Home Network.
Mcas ‐ server side
1. make started by Green button and then press OK button
2. you will see ˇ®smart card 2ˇŻ and ˇ®server settingˇŻ menu if your receiver has smart card inside
3. enter ˇ®server settingˇŻ menu by press OK
4.ˇ®portˇŻ : donˇŻt need to change port and it is better to leave as default, but you can change it as 5
digits if you need and it is safe.
5.ˇ®user settingˇŻ : you can input user id and password to allow connecting to server receiver from
client which is listed inside user setting menu.
6.ˇ®auto startˇŻ : you can change as ˇ®onˇŻ if you want to start this server menu when you start
Mcas plugin
7. login confirmation : you can change as ˇ®onˇŻ if you want to check user id and password from
client receiver
Mclient ‐ client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then
input the IP address of server receiver (no need //)
4. lastly, go to the ˇ®connect to serverˇŻ and press ˇ®OKˇŻ button